This is the ultimate instrument microphone kit for live performing string quartets, where the highest suppression of nearby instruments are needed.

High definition condenser microphones with the highest feedback suppression ever achieved.

What’s in the box?

2 x V5200LB-WLM (Violin/viola mic) +
1 x B5201LB-WLM (Viola mic) +
1 X C5300LB-WLM (Cello mic)

With Built-In Windshield

The built-in windshield is designed to drastically reduce wind noise in open air performances. The windshield is placed inside the microphone and is therefore invisible and non-removable. With the built-in windshield option, you do not need to add any other windshields to your microphone. The built-in windshield will not change the quality of the microphone in other performance contexts.

The REMIC LB/WLM series are supplied with TA5M connectors which allow you to connect the REMIC microphones via a variety of adapters to selected SHURE and SENNHEISER wireless transmitters. This solution enables you to gain maximum flexibility to move around on stage in extremely loud live productions.

The adapters also allow you to connect the LB/WLM microphone models to a standard XLR wired connection.

Due to the fact that most beltpack wireless transmitters do not provide 48 volt of phantom power nor a balanced input stage, this series of REMIC MICROPHONES have been designed to support wireless systems with unbalanced input circuits and a BIAS voltage of 3 to 8 volt.

In order to connect to the wireless transmitters, you need to purchase the correct adaptor that lets you connect to one of the following wireless transmitter systems (The RAD001LB adapter is included when purchasing the LB-WLM models):

REMIC ADAPTERS AND SUPPORTED WIRELESS SYSTEMS:

RAD 001 | adapter for XLR 48 volt phantom, REMIC studio/live models
RAD 001LB (adapter for XLR 48 volt phantom, REMIC live extreme models)

RAD 003 | TRS 3.5 connector
For Remic studio/live and Live mic to Sennheiser EW-series.
SK100G3/G4, SK300G3/G4, SK500G3/G4, Transmitter module 3.5 TRS w/screw lock connector.

RAD 006 | TA4 connector
For Remic studio/live and Live to SHURE with TA4F connector.
FP1, GLXD1, QLXD1, PG1, PGX1, PGXD1, SLX1, UC1, ULX1, ULXD1, UR1, UR1M, AD1)
Transmitter module with TA4M connector.

RAD 010 | LEMO-3 connector
For Remic studio/live and live microphones to SHURE (UR1M, AD1) and SENNHEISER (SK2000, SK3063, SK5012, SK5212II, SK6000, SK9000) Transmitter modules with LEMO3 connector.

Please note that some dynamic non-linearities will occur when using wireless systems in comparison to a wired solution.

MORE ABOUT THE “LB/WLM” MODELS:

The LB/WLM microphone models are based on the same principle as the normal LB model only with a different connector and designed to support wireless transmitters with unbalanced input circuits and a BIAS voltage of 3 to 8 volt (instead of 48 volt). It delivers a natural, but more “dry” and “woodish” sound response in comparison to the “Studio/Live” model.