REMIC C5300 WLM Cello/Violone – Studio/Live mic. for wireless systems
The REMIC C5300 WLM supplied with a TA5M connector allows you to connect the REMIC microphone via a variety of adapters to selected SHURE and SENNHEISER wireless transmitters, which enables you to gain maximum flexibility to move around on stage during live productions.
It also enabels you to connect the C5300 WLM to a standard XLR wired connection.
Due to the fact that most wireless beltpack transmitters do not provide 48 volt of phantom power nor a balanced input stage, a series of REMIC MICROPHONES have been designed to support selected wireless systems with unbalanced input circuits and a BIAS voltage of 3 to 8 volt.
The C5300 WLM is based on the same principle as the C5300 model, but is supplied with a different connector – the TA5M multi connector, which allows you to connect your C5300 WLM microphone to a variety of adapters for Shure and Sennheiser wireless systems as well as the standard XLR.
In order to connect to the wireless transmitters, you need to purchase the correct adaptor that lets you connect to one of the following wireless transmitter systems:
REMIC ADAPTERS AND SUPPORTED WIRELESS SYSTEMS:
RAD 001 | adapter for XLR 48 volt phantom, REMIC studio/live models (RAD001 is included when you buy a C5300 WLM microphone)
RAD 001LB (adapter for XLR 48 volt phantom, REMIC loud live LB models)
RAD 003 | TRS 3.5 connector
For Remic studio/live and LB live microphone to the Sennheiser EW-series.
SK100G3/G4, SK300G3/G4, SK500G3/G4, Transmitter module 3.5 TRS w/screw lock connector.
RAD 006 | TA4 connector
For Remic studio/live and Live to SHURE with TA4F connector.
FP1, GLXD1, QLXD1, PG1, PGX1, PGXD1, SLX1, UC1, ULX1, ULXD1, UR1, UR1M, AD1)
Transmitter module with TA4M connector.
RAD 010 | LEMO-3 connector
For Remic studio/live and live microphones to SHURE (UR1M, AD1) and SENNHEISER (SK2000, SK3063, SK5012, SK5212II, SK6000, SK9000) Transmitter modules with LEMO3 connector.
Please note that some dynamic non-linearities will occur when using wireless systems in comparison to a wired solution.
- ASTONISHING FEEDBACK SUPPRESSION
- ASTONISHING SOUND QUALITY
- INNOVATIVE MOUNT
C5300 WL Cello/Violone – Studio/Live Mic. for Wireless Systems
The REMIC C5300 WLM supplied with a TA5M connector allows you to connect the REMIC microphone via a variety of adapters to selected SHURE and SENNHEISER wireless transmitters, which enables you to gain maximum flexibility to move around on stage during live productions.
It also enabels you to connect the C5300 WLM to a standard XLR wired connection.
Due to the fact that most wireless beltpack transmitters do not provide 48 volt of phantom power nor a balanced input stage, a series of REMIC MICROPHONES have been designed to support selected wireless systems with unbalanced input circuits and a BIAS voltage of 3 to 8 volt.
The C5300 WLM is based on the same principle as the C5300 model, but is supplied with a different connector – the TA5M multi connector, which allows you to connect your C5300 WLM microphone to a variety of adapters for Shure and Sennheiser wireless systems as well as the standard XLR.
In order to connect to the wireless transmitters, you need to purchase the correct adaptor that lets you connect to one of the following wireless transmitter systems:
REMIC ADAPTERS AND SUPPORTED WIRELESS SYSTEMS:
RAD 001 | adapter for XLR 48 volt phantom, REMIC studio/live models (RAD001 is included when you buy a C5300 WLM microphone)
RAD 001LB (adapter for XLR 48 volt phantom, REMIC loud live LB models)
RAD 003 | TRS 3.5 connector
For Remic studio/live and LB live microphone to the Sennheiser EW-series.
SK100G3/G4, SK300G3/G4, SK500G3/G4, Transmitter module 3.5 TRS w/screw lock connector.
RAD 006 | TA4 connector
For Remic studio/live and Live to SHURE with TA4F connector.
FP1, GLXD1, QLXD1, PG1, PGX1, PGXD1, SLX1, UC1, ULX1, ULXD1, UR1, UR1M, AD1)
Transmitter module with TA4M connector.
RAD 010 | LEMO-3 connector
For Remic studio/live and live microphones to SHURE (UR1M, AD1) and SENNHEISER (SK2000, SK3063, SK5012, SK5212II, SK6000, SK9000) Transmitter modules with LEMO3 connector.
Please note that some dynamic non-linearities will occur when using wireless systems in comparison to a wired solution.
With Built-In Windshield
All microphones for strings have a built-in windshield, which is designed to drastically reduce wind noise in open air performances. The windshield is placed inside the microphone and is therefore invisible and non-removable. With the built-in windshield, you do not need to add any other windshields to your microphone. The built-in windshield does not change the quality of the microphone or sound quality in general.
SUPPORTED WIRELESS TRANSMITTERS:
SHURE w/TA4F Connector | FP1, GLXD1, QLXD1, PG1, PGX1, PGXD1, SLX1, UC1, ULX1, ULXD1, UR1, UR1M
SHURE w/3P LEMO Connector | UR1M
SENNHEISER w/3.5 TRS Connector | SK100G3/G4, SK300G3/G4, SK500G3/G4
SENNHEISER w/LEMO-3 Connector | SK2000, SK3063, SK5012, SK5212II, SK6000, SK9000
Please note that some dynamic non-linearities will occur when using wireless systems in comparison to a wired solution.
MORE ABOUT THE “WLM” MODEL:
The REMIC C5300/WLM is designed for studio and live productions and delivers a natural and open sound, an extreme accuracy and fast transient response that captures the finest and most delicate overtones of the instrument.
High definition condenser microphone with superior feedback suppression and high isolation of nearby instruments.
Since there are no clamps and clips in order to mount and hold the microphone, you will retain the aesthetic appearance of your instrument.
Fast Shipping and Professional Packaging
We provide a variety of shipping options thanks to our long-standing relationships with UPS, FedEx and DHL. Our warehouse staff is expertly trained and will wrap your goods in accordance to our precise and precise specifications. Your goods will go through an extensive inspection and will be properly secured before they are delivered. We ship to thousands customers every day across multiple countries. This shows that we're committed to becoming the biggest retailer online in the world. Both Europe and the USA have distribution and warehouse centres.
Orders with more than one item are given processing time according to each item.
Before shipping, all ordered products will be thoroughly inspected. The majority of orders will be delivered within 48 hours. The expected delivery time will be between 3-7 days.
Returns
The inventory is constantly changing and we are unable to control it completely due to the fact that multiple parties are involved, including our warehouse and factory. The actual inventory may fluctuate at any time. Be aware that it's possible that your order could be out of stock after you've placed your order.
Our policy is valid for a period of 30 days. If you haven't received the product within the 30 days period, we're not able to provide either a return or exchange.
The item should not be used, and it must be in the original packaging. The item must be in its original packaging.
Related products
Microphone Accessories
Accessories
Microphones
Accessories
Microphones
Accessories
Microphone Accessories
Microphone Accessories
Microphone Accessories
Microphone Accessories
Accessories
Microphone Accessories
Accessories
Microphones
Microphone Stands
ADAM HALL | STANDS S 6 B MICROPHONE STAND WITH BOOM ARM ADAM HALL
Microphones
Accessories
Microphone Accessories
Microphones
Microphone Accessories
Accessories
Microphone Stands
ADAM HALL | S 5 BE Microphone stand black with boom arm ADAM HALL
Accessories
Microphone Accessories
Microphones
Microphone Accessories