Lewitt DGT 450
PROFESSIONAL USB MICROPHONE
Perfect for podcasts, gaming and home studio recording
Whenever you need high-resolution audio, the DGT 450 is the ideal solution for professional USB recording. Featuring the same capsule used in our highly acclaimed studio line, the DGT 450 guarantees distortion-free and crystal-clear sound. A built-in headphone amp, direct monitoring functionality, low-cut filter, and pre-attenuation round off this comprehensive USB solution.
Vocal recording
Unmatched quality – anyplace, anytime
Pure condenser sound captures your voice in studio quality. Perfect for traditional vocal recording, voice over, podcast and streaming, you name it.
Specifications
Type
Condenser, permanently polarized
Acoustical operating principle
Pressure gradient transducer
Transducer Ø
17 mm, 0.67 in
Polar pattern
Cardioid
Frequency range
50 … 20,000 Hz
Dynamic range
93 dB (A)
Pre-attenuation pad
0 dB
-10 dB
Low-cut filter
linear
80 Hz (12 dB/oct)
Front to back ratio at 1kHz
≥ 15 dB (A)
Sensitivity at 1 kHz
– 24 dBFS
Analog gain range
0 … 44 dB
Equivalent noise level
25 dB (A)
Max. SPL for 0.5 % THD
118 dBSPL, 0 dB pre-attenuation
General
Resolution
24 Bit
Sample rate
44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Recording modes
Cardioid, Cardioid + Line-in
Supply voltage (DGT)
on iOS additional 5V/500mA, micro-USB power supply required
Connector
USB to 18-pin lockable hi-speed connector
Line-in
Input impedance
> 1 Meg Ω
Full scale input voltage (0 dB gain)
0.7 VRMS, -0.9 dBu (re 0.775 VRMS)
Input dynamic range
≥ 96 dB (A)
Frequency response
20 … 20,000 Hz
Operating principle
Mono line input
Analog gain range
0 … 12 dB
Headphones
Headphone output power
20 mW at 16 Ω, THD+N < 0,5%
16 mW at 32 Ω, THD+N < 0,5%
Frequency response
20 … 20,000 Hz
Headphone volume control
– 60 dB … 0 dB