DPA d:sign™ 4098 Supercardioid Mic, Black, XLR, 122 cm Boom, Floor Stand, Single Mic DPA

d:sign™

Floor Stand Microphone

Elegant and exclusive design

• Low noise and natural voice
• Highly directional for high isolation
• Uniform, frequency independent directionality
• Exclusive, elegant design
• Integrated shock-mounting in floor base
• Rapidly stabilizing microphone boom pole
• Modular flexibility (d:dicate™ capsules)

A complete cardioid microphone floor stand solution in the modular d:sign™ Microphone Series offering a high-quality stage voice or instrument mic.

This floor stand solution has an elegant and exclusive design with a black, non-reflective surface specifically made to handle the, from time to time, rough life in TV-studios, OB-vans and onstage in theaters and concert halls. The Floor Base has an integrated shock mounting solution. The thread screw holds the Stand Extension and MMP-F Modular Active Boom. This unique design allows for a long stage microphone boom pole that does not swing, but rapidly stabilizes itself after being positioned.

These floor stand solutions can quickly, and with no tools needed, transform into a new configuration. You can combine it with another d:dicate™ Microphone Capsule or Preamplifier.

d:sign™ 4098 Floor Stand Microphones

With very low noise and a high sensitivity, d:screet™  Supercardioid Microphones offer the most clear, transparent, and natural sound available on the miniature mic market. The mics are capable of handling extremely high SPL before clipping. With a linear response, low distortion and an extremely large dynamic range, they sound great no matter how challenging the environment.

This floor stand solution comes in one length:

d:screet™ SC4098-BX-FGS  Supercardioid Microphone, XLR, 122 cm (48 in) Boom, Floor Stand

Specifications

• Directional pattern Supercardioid
• Principle of operation Pressure gradient
• Cartridge type Pre-polarized condenser
• Frequency range 20 Hz – 20 kHz
• Frequency range, ± 2 dB, at 20 cm (7.9 in) MicroDot: 80 Hz – 15 kHz with 3 dB soft boost at 8-15 kHz
• XLR-3M: 100 Hz – 15 kHz with 3 dB soft boost at 8-15 kHz and permanent 2nd order low-cut filter at 80 Hz
• Sensitivity, nominal, ±3 dB at 1 kHz 16 mV/Pa; -36 dB re. 1 V/Pa
• Equivalent noise level, A-weighted Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
• Equivalent noise level, ITU-R BS.468-4 Typ. 35 dB (max. 38 dB)
• S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL) Typ. 71 dB(A)
• Total harmonic distortion (THD) < 1% up to 125 dB SPL peak
• Dynamic range Typ. 102 dB
• Max. SPL, peak before clipping 135 dB
• Output impedance From MicroDot: 30 – 40 Ω. From XLR connector or DAD6001 XLR Adapter: 100 Ω
• Minimum load impedance 2 kΩ
• Cable drive capability Up to 300 m (984 ft) with XLR connector or DAD6001 XLR Adapter
• Output balance principle Signal balanced with XLR connector og DAD6001 XLR Adapter
• Common mode rejection ratio (CMRR) > 60 dB from 50 Hz to 15 kHz with DAD6001 XLR Adapter
• Power supply (for full performance) MicroDot: Min. 5 V to max. 50 V through DPA adapter for wireless systems
• or 48 V phantom power ±4 V with DAD6001-BC XLR adapter
• XLR-3M: 48 V phantom power ±4 V
• Current consumption Typ. 1.5 mA (microphone). 3.5 mA with DAD6001 XLR Adapter
• Connector MicroDot or XLR-3M
• Color Black or white
• Weight Microdot:
• 16 cm (6 in): 12 g (0.4 oz)
• 28 cm (11 in): 20 g (0.7 oz)
• 43 cm (17 in): 28 g (1.0 oz)
• 77 cm (30 in): 55 g (1.9 oz)
• 122 cm (48 in): 67 g (2.4 oz)
• XLR-3M:
• 16 cm (6 in): 75 g (2.6 oz)
• 28 cm (11 in): 80 g (2.8 oz)
• 43 cm (17 in): 88 g (3.1 oz)
• 77 cm (30 in): 115 g (4.1 oz)
• 122 cm (48 in): 127 g (4.5 oz)
• Microphone diameter 10 mm (0.4 in)
• Capsule diameter 5.4 mm (0.21 in)
• Microphone length Microdot: 16 cm (6 in), 28 cm (11 in), 43 cm (17 in), 77 cm (30 in), 122 cm (48 in)
• XLR-3M: 20 cm (8 in), 32 cm (13 in), 47 cm (18 in), 77 cm (30 in), 122 cm (48 in).
• Polarity +V at MicroDot pin for positive sound pressure (and pin 2 on XLR connector or DAD6001 XLR adapter)
• Temperature range -40°C to 45°C (-40°F to 113°F)
• Relative humidity (RH) Up to 90%