d:sign™
Floor Stand Microphone
Elegant and exclusive design
- Low noise and natural voice
- Highly directional for high isolation
- Uniform, frequency independent directionality
- Exclusive, elegant design
- Integrated shock-mounting in floor base
- Rapidly stabilizing microphone boom pole
- Modular flexibility (d:dicate™ capsules)
A complete cardioid microphone floor stand solution in the modular d:sign™ Microphone Series offering a high-quality stage voice or instrument mic.
This floor stand solution has an elegant and exclusive design with a black, non-reflective surface specifically made to handle the, from time to time, rough life in TV-studios, OB-vans and onstage in theaters and concert halls. The Floor Base has an integrated shock mounting solution. The thread screw holds the Stand Extension and MMP-F Modular Active Boom. This unique design allows for a long stage microphone boom pole that does not swing, but rapidly stabilizes itself after being positioned.
These floor stand solutions can quickly, and with no tools needed, transform into a new configuration. You can combine it with another d:dicate™ Microphone Capsule or Preamplifier.
d:sign™ 4011 Floor Stand Microphones
Using the MMC4011 Cardioid Microphone Capsule for its directional quality and attention to detail, this solution makes everything sounds like the original. The first-order cardioid pickup pattern provides superb separation between sound sources. It is equally suitable for close-up work on acoustic guitar, grand piano, overheads, percussion, wind instruments and vocals as it is for spot-miking symphonies. It can handle incredibly high sound levels.
A flat on-axis frequency response and excellent phase response deliver a faithful reproduction of the original sound. The off-axis response is similarly smooth so that any leakage is an accurate reflection of the original, though attenuated according to the true first-order cardioid pickup pattern.
d:sign™ 4011 Floor Stand Microphones comes in the following lengths:
d:dicate™ 4011-BX-F-075 Supercardioid Microphone, Single 77 cm (30 in) Boom, Floor Stand
d:dicate™ 4011-BX-F-120 Supercardioid Microphone, Single 122 cm (48 in) Boom, Floor Stand
d:dicate™ 4011-BX-F-120-T Supercardioid Microphone, Twin 122 cm (48 in) Boom, Floor Stand
Specifications
- Directional pattern Cardioid
- Principle of operation Pressure gradient
- Cartridge type Pre-polarized condenser
- Frequency range 20 Hz – 20 kHz
- Frequency range, ±2 dB, at 30 cm (11.8 in) 40 Hz – 20 kHz
- Sensitivity, nominal, ±2 dB at 1 kHz 10 mV/Pa; -40 dB re. 1 V/Pa
- Equivalent noise level, A-weighted Typ. 18 dB(A) re. 20 µPa (max. 20 dB(A))
- Equivalent noise level, ITU-R BS.468-4 Typ. 25 dB
- S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL) Typ. 76 dB(A)
- Total harmonic distortion (THD) < 1% up to 139 dB SPL peak
- Dynamic range Typ. 121 dB
- Max. SPL, peak before clipping 144 dB
- Output impedance 100 Ω
- Minimum load impedance 2 kΩ
- Cable drive capability 100 m (328 ft)
- Output balance principle Impedance balancing
- Common mode rejection ratio (CMRR) > 40 dB
- Power supply (for full performance) 48 V Phantom power (± 4 V)
- Current consumption 3.5 mA
- Connector XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: – phase
- Color Matte black
- Microphone diameter 19 mm (0.75 in)
- Capsule diameter 19 mm (0.75 in)
- Microphone length Capsule: 23 mm (0.9 in), Boom poles: 20 cm (8 in), 32 cm (13 in), 47 cm (18 in), 77 cm (30 in), 122 cm (48 in)
- Maximum output voltage, RMS 2.2 V
- Polarity +V at pin 2 for positive sound pressure
- Temperature range -40°C to 45°C (-40°F to 113°F)
- Relative humidity (RH) Up to 90%
- Matching tolerance (frequency response and sensitivity) ±1 dB
- Phase deviation for kit < 10°