5006-11A SURROUND KIT WITH THREE d:dicate™ 4006A, TWO d:dicate™4011A, CLIPS AND WINDSCREENS IN PELI™
A complete surround kit combining three d:dicate™ 4006A Omnidirectional Microphones and two d:dicate™ 4011A Cardioid Microphones, carefully factory-matched to achieve full precision.
Even though the standard tolerances on the d:dicate™ Microphone Series are extremely low, the surround match is even closer.
The specially-selected d:dicate™ 4006A Omnidirectional Microphones are matched within ±0.5 dB on both frequency response and sensitivity. The d:dicate™ 4011A Cardioid Microphones are matched within ±1 dB.
The natural sound, high sensitivity, low noise-floor and extremely linear frequency response from 10 Hz to 20 kHz (±2 dB) of the microphones make the d:dicate™ 4006A Omnidirectional Microphones the perfect choice for all AB Stereo, Decca Tree or surround main array recordings. The precise reproduction, total transparency and natural-sounding clarity of d:dicate™ 4006A Omnidirectional Microphones will provide you with a lifetime of satisfying listening.
The foam design in the heavy-duty transportation box allows for fast and easy exchange of microphone/accessory inlays.
Bundle deal
You save 500 EUR off the list price when you buy S5 Surround Mount along with this Matched Surround Kit. The deal also applies to:
d:mension™ 5006A Surround Kit with d:dicate™ 4006A Omnidirectional Microphones
d:mension™ 5015A Surround Kit with d:dicate™ 4015 Wide Cardioid Microphones
Features
The product offers the following features
Three Omni + two Cardioid carefully matched microphones
Decca Tree front + cardioids rear
Useful as orchestral main pair
Peli™ Case transportation and protection
Frequency response of 4011A
Polar pattern of 4011A
Frequency response of 4006A
Polar pattern of 4006A
Frequency response with Close-miking Grid
Frequency response with Diffuse-field Grid
Frequency response with Nose Cone
Polar pattern with Close-miking Grid
Polar pattern with Diffuse-field Grid
Polar pattern with Nose Cone
Polar pattern with Nose Cone – Vertical
Typical on and off-axis response of a 4011F
Specifications
d:mension™ Surround Solutions 5006-11A SURROUND KIT WITH THREE d:dicate™ 4006A, TWO d:dicate™4011A, CLIPS AND WINDSCREENS IN PELI™
Directional pattern4006A: Omnidirectional; 4011A: Cardioid
Principle of operation4006A: Pressure; 4011A: Pressure gradient
Cartridge typePre-polarized condenser
Frequency range10 Hz to 20 kHz
Frequency range, ±2 dB4006A: 10 Hz to 20 kHz
Frequency range, ±2 dB, at 30 cm (11.8 in)4011A: 40 Hz to 20 kHz
Sensitivity, nominal, ±2 dB at 250 Hz4006A: 40 mV/Pa; -28 dB re. 1 V/Pa
Sensitivity, nominal, ±2 dB at 1 kHz4011A: 10 mV/Pa; -40 dB re. 1 V/Pa
Equivalent noise level, A-weighted4006A: Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A)). 4011A: Typ. 18 dB(A) re. 20 µPa (max. 20 dB)
Equivalent noise level, ITU-R BS.468-44006A: Typ. 27 dB (max. 29 dB). 4011A: Typ. 25 dB (correct with the attenuator in 0 dB or -20 dB setting)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL)4006A: Typ. 79 dB(A). 4011A: Typ. 76 dB(A)
Total harmonic distortion (THD)< 1% up to 139 dB SPL peak
Dynamic range4006A: Typ. 124 dB. 4011A: Typ. 121 dB
Max. SPL, peak before clipping4006A: 147 dB. 4011A: 159 dB
Switchable attenuator, filters etc.0 dB / -20 dB
Output impedance< 200 Ω
Minimum load impedance2 kΩ
Cable drive capability100 m (328 ft)
Output balance principleImpedance balancing with Active Drive
Common mode rejection ratio (CMRR)> 60 dB
Power supply (for full performance)48 V Phantom power (± 4 V)
Current consumption2.8 mA
ConnectorXLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: – phase
ColorMatte black
Weight4006A: 163 g (5.7 oz). 4011A: 158 g (5.6 oz)
Microphone diameter4006A: 16 – 19 mm (0.63 – 0.75 in). 4011A: 19 mm (0.75 in)
Capsule diameter4006A: 16 mm (0.63 in). 4011A: 19 mm (0.75 in)
Microphone length170 mm (6.7 in)
Maximum output voltage, RMS> 5 V
Polarity+V at pin 2 for positive sound pressure
Temperature range-40°C to 45°C (-40°F to 113°F)
Relative humidity (RH)Up to 90%
Matching tolerance (frequency response and sensitivity)4006A: ±0.5 dB. 4011A: ±1 dB
Phase deviation for kit4006A: < 5°. 4011A: < 10°