5006-11A SURROUND KIT WITH THREE d:dicate™ 4006A, TWO d:dicate™4011A, CLIPS AND WINDSCREENS IN PELI™
A complete surround kit combining three d:dicate™ 4006A Omnidirectional Microphones and two d:dicate™ 4011A Cardioid Microphones, carefully factory-matched to achieve full precision.
Even though the standard tolerances on the d:dicate™ Microphone Series are extremely low, the surround match is even closer.
The specially-selected d:dicate™ 4006A Omnidirectional Microphones are matched within ±0.5 dB on both frequency response and sensitivity. The d:dicate™ 4011A Cardioid Microphones are matched within ±1 dB.
The natural sound, high sensitivity, low noise-floor and extremely linear frequency response from 10 Hz to 20 kHz (±2 dB) of the microphones make the d:dicate™ 4006A Omnidirectional Microphones the perfect choice for all AB Stereo, Decca Tree or surround main array recordings. The precise reproduction, total transparency and natural-sounding clarity of d:dicate™ 4006A Omnidirectional Microphones will provide you with a lifetime of satisfying listening.
The foam design in the heavy-duty transportation box allows for fast and easy exchange of microphone/accessory inlays.
Bundle deal
You save 500 EUR off the list price when you buy S5 Surround Mount along with this Matched Surround Kit. The deal also applies to:
d:mension™ 5006A Surround Kit with d:dicate™ 4006A Omnidirectional Microphones
d:mension™ 5015A Surround Kit with d:dicate™ 4015 Wide Cardioid Microphones
Features
The product offers the following features
Three Omni + two Cardioid carefully matched microphones
Decca Tree front + cardioids rear
Useful as orchestral main pair
Peli™ Case transportation and protection
Frequency response of 4011A
Polar pattern of 4011A
Frequency response of 4006A
Polar pattern of 4006A
Frequency response with Close-miking Grid
Frequency response with Diffuse-field Grid
Frequency response with Nose Cone
Polar pattern with Close-miking Grid
Polar pattern with Diffuse-field Grid
Polar pattern with Nose Cone
Polar pattern with Nose Cone – Vertical
Typical on and off-axis response of a 4011F
Specifications
d:mension™ Surround Solutions 5006-11A SURROUND KIT WITH THREE d:dicate™ 4006A, TWO d:dicate™4011A, CLIPS AND WINDSCREENS IN PELI™
Directional pattern4006A: Omnidirectional; 4011A: Cardioid
Principle of operation4006A: Pressure; 4011A: Pressure gradient
Cartridge typePre-polarized condenser
Frequency range10 Hz to 20 kHz
Frequency range, ±2 dB4006A: 10 Hz to 20 kHz
Frequency range, ±2 dB, at 30 cm (11.8 in)4011A: 40 Hz to 20 kHz
Sensitivity, nominal, ±2 dB at 250 Hz4006A: 40 mV/Pa; -28 dB re. 1 V/Pa
Sensitivity, nominal, ±2 dB at 1 kHz4011A: 10 mV/Pa; -40 dB re. 1 V/Pa
Equivalent noise level, A-weighted4006A: Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A)). 4011A: Typ. 18 dB(A) re. 20 µPa (max. 20 dB)
Equivalent noise level, ITU-R BS.468-44006A: Typ. 27 dB (max. 29 dB). 4011A: Typ. 25 dB (correct with the attenuator in 0 dB or -20 dB setting)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL)4006A: Typ. 79 dB(A). 4011A: Typ. 76 dB(A)
Total harmonic distortion (THD)< 1% up to 139 dB SPL peak
Dynamic range4006A: Typ. 124 dB. 4011A: Typ. 121 dB
Max. SPL, peak before clipping4006A: 147 dB. 4011A: 159 dB
Switchable attenuator, filters etc.0 dB / -20 dB
Output impedance< 200 Ω
Minimum load impedance2 kΩ
Cable drive capability100 m (328 ft)
Output balance principleImpedance balancing with Active Drive
Common mode rejection ratio (CMRR)> 60 dB
Power supply (for full performance)48 V Phantom power (± 4 V)
Current consumption2.8 mA
ConnectorXLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: – phase
ColorMatte black
Weight4006A: 163 g (5.7 oz). 4011A: 158 g (5.6 oz)
Microphone diameter4006A: 16 – 19 mm (0.63 – 0.75 in). 4011A: 19 mm (0.75 in)
Capsule diameter4006A: 16 mm (0.63 in). 4011A: 19 mm (0.75 in)
Microphone length170 mm (6.7 in)
Maximum output voltage, RMS> 5 V
Polarity+V at pin 2 for positive sound pressure
Temperature range-40°C to 45°C (-40°F to 113°F)
Relative humidity (RH)Up to 90%
Matching tolerance (frequency response and sensitivity)4006A: ±0.5 dB. 4011A: ±1 dB
Phase deviation for kit4006A: < 5°. 4011A: < 10°
Fast Shipping & Professional Packing
We provide a variety of shipping options thanks to our long-running partnerships with UPS, FedEx and DHL. Our warehouse staff are educated to pack your items precisely according to the specifications we offer. The goods you send us are checked thoroughly and secured properly prior to shipping. We deliver to thousands of clients every day from all over the world. This shows how we're dedicated to be the largest online retailer in the world. The distribution centers and warehouses distribution are in Europe, as well as the USA.
It is important to note that orders with more than one item are processed according to the particular item.
Before shipping We will inspect thoroughly the items you've ordered. Most orders are delivered within 48 hours. Delivery is expected to take between 3 and seven days.
Returns
Due to the multiple parties involved such as the factory and the warehouse, we're unable to completely manage our stock. The actual stock can change at any moment. Be aware that your order may be out of stock when the order has been placed.
Our policy runs for 30 days. If it's been more 30 days since you purchased your item We're sorry to say that we can't offer you a complete exchange or refund.
You can only return a product when it's unopened and still in the same condition as the day you received it. It must also be returned in the original packaging.
Related products
Turntables & Accessories
MIDI Controllers
Beat Production
Beat Production
Akai Professional MPC X Standalone Sampler and Sequencer Akai
MIDI Controllers
Turntables & Accessories
DAW Software
MIDI Controllers
MIDI Controllers
MIDI Controllers
MIDI Controllers
Akai Professional Fire Grid Controller for FL Studio [ USED ] Akai
Beat Production
MIDI Controllers
DJ Controllers
MIDI Controllers
Studio Mixers & Control Surfaces
Electronic Drums
MIDI Controllers
Beat Production
Electronic Drums
Beat Production
MIDI Controllers
Beat Production
Akai Professional MPC Live Standalone Sampler and Sequencer Akai
MIDI Controllers
MIDI Controllers
MIDI Controllers
Studio Monitors
HEADPHONES
Electronic Drums