SP260 Loudspeaker Processor
CONTROL
OVER YOUR SYSTEM
Offering sophisticated EQ, crossover, dynamics processing and system protection, the Mackie SP260 2×6 Speaker Processor provides complete system optimization for both passive and powered systems. Five different operating modes cover a wide range of systems with 24 user-definable presets and flexible I/O for simple routing and configuration.
Features
Fine-Tuned for the Best Performance
FLEXIBLE
Your Input. Our Command.
The SP260 has two inputs with whole host of processing and routing capabilities. Each input features a mute switch and variable gain control and 5-band EQ. You can choose between parametric or hi/lo shelving, providing an extremely flexible approach to room tuning. There’s even a 600ms delay available on each input.
CONNECT
All About the Output
There are six individual outputs on the Mackie SP260 providing a wide range of possible connections, depending on your system. Each output features a mute switch, individual gain adjustment, 7-band EQ, high and low pass filters, 600ms delay and powerful output limiting.
PROFESSIONAL
Premium Sound Quality
With high-end AKM AD/DA converters with 120 dB dynamic range, eight different filter types including Butterworth, Bessel and Linkwitz-Reilly and a sophisticated DSP engine and algorithms, you can count on superior sound quality each and every night.
OPTIMIZE
Super Simple Setup
Choose from a range of pre-configured system setups to assign the correct inputs, name outputs and provide the starting crossover point for your system. Use all the available input and output processing to optimize your system for the venue. Once that’s done, you can easily save the setup in one of the 24 available presets.
CONTROL
Powerful Desktop Software
With the Mackie SP260 Control Application, you have total control over your system and presets from an easy-to-use interface. Just plug in your windows laptop via the convenient front panel USB port to harness the power of the app. The software auto-detects the SP260 and shows the current settings.
solved
Complete System Solution
Passive, powered, bi-amped, tri-amped, delay stacks, fill stacks, cry rooms and balcony clusters. All easily recallable via presets. Everything is manageable with the SP260. Getting total control over your system has never been easier.
Mackie SP260 Specs
Operating Modes | 2 x Stereo + Sub: 2 full-range loudspeaker pairs and a pair of (mono by default) subwoofers 2 x 2 Way + Sub: 2 bi-ampable full-range loudspeakers and a pair of (mono by default) subwoofers 2 x 3 Way: 2 tri-ampable full-range loudspeakers 3 x Stereo: 3 full-range loudspeaker pairs 1 x 6 Way: Mono 6-way setup |
Gain | ±15 dB ±0.1 dB increments |
Delay | Time (ms): 0.00 to 600.99 ms ±1.00 & ±0.02 ms increments Distance: 0.00 to 670.23′ (0.00 to 204.33 m) ±1.11 & ±0.02′ (±0.34 & ±0.007 m) increments |
Bypass | EQ: On or Off |
Band | 5-Band EQ: Frequency: 20 Hz to 20 kHz, 1/24 octave increments Bandwidth: 0.05 to 3.0, ±0.05 increments Gain: ±15 dB, ±0.05 dB increments High or Low-Shelving: 6 or 12 dB/octave |
Name | User-editable |
Source | InA, InB, InA+InB |
Polarity | 180˚ invert |
Gain | -12.0 to +6.0 dB, ±0.1 dB increments |
Bypass | EQ: On or Off |
Band | 7-Band EQ: Frequency: 20 Hz to 20 kHz, 1/24 octave increments Bandwidth: 0.05 to 3.0, ±0.05 increments Gain: ±15 dB, ±0.05 dB increments High or Low-Shelving: 6 or 12 dB/octave |
Delay | Time: 0.00 to 600.99 ms ±1.00 & ±0.02 ms increments Distance: 0.00 to 670.23′ (0.00 to 204.33 m) ±1.11 & ±0.02′ (±0.34 & ±0.007 m) increments |
Filter | High- and Low-Pass: Frequency: 20 Hz to 20 kHz Filter / Slope: No Cut-Off Butterworth 6 dB/octave Butterworth 12 dB/octave Linkwitz-Riley 12 dB/octave Bessel 12 dB/octave Butterworth 18 dB/octave Butterworth 24 dB/octave Linkwitz-Riley 24 dB/octave Bessel 24 dB/octave |
Limiter | Attack: 5 to 200 ms (5 ms to 20 ms) ±1 ms increments (20 ms to 30 ms) ±5 ms increments (30 ms to 100 ms) ±10 ms increments (100 ms to 200 ms) ±20 ms increments Release: 0.1 to 3.0 sec, ±0.1 sec increments Threshold: -10 to +20 dBu, ±0.2 dBu increments |
Connector | 2 balanced XLRs |
Max Input Signal | Line Level: +20 dBu |
CMRR | >58 dB |
Input Meters | Range: Clip: -20, -10, 0, +3, +9, +15 dBu |
Connector | Outputs: 6 balanced XLRs |
Max Input Signal | Line Level: +21 dBu |
Meter | Output Range: Level Mode: Limit Mode Limit: Limit Clip: 0 dBr +15 dBu: -3 dBr +9 dBu: -6 dBr +3 dBu: -9 dBr 0 dBu: -12 dBr -15 dBu: -15 dBr |
Converter | Type: 24-bit AKM |
Dynamic Range | 120 dB |
Sample Rate | 48 kHz |
Bit Depth | 24-bit |
Frequency Response | 20 Hz to 20 kHz, ±0.2 dB |
Dynamic Range | 111 dB A-weighted 108 dB unweighted |
Distortion | Frequency: 20 Hz to 20 kHz: |
Crosstalk | Interchannel: 22 Hz to 22 kHz (unweighted) -107 dB (+20 dBu @ 1 kHz) Input to Output: -107 dB (+20 dBu @ 1 kHz) |
Format | USB 1.1 |
Power Consumption | AC: 40 W |
Power Supply (AC) | Universal: 100 to 240 VAC, 50 to 60 Hz |
Power Connector | 3-pin IEC |
Operating Temperature | Extended Ambient Temperature: 32 to 104˚F (0 to 40˚C) |
Software Requirements | PC: Microsoft Windows 7 32/64 SP 1, Vista 32/64 SP 2 or XP 32 SP 3 Pentium 4, Celeron, or Athlon XP processor 512 MB RAM |
Display | 2 x 24-character LCD with backlight |
Height | 1.8″ (46.0 mm) (1U rack mount design) |
Width | Front: 19.0″ (483.0 mm) Rear: 17.3″ (439.0 mm) |
Depth | 9.0″ (229.0 mm) |
Weight | 5.8 lb (2.6 kg) |
Package Weight | 8.25 lb |
Box Dimensions (LxWxH) | 21.1 x 12.1 x 4.4″ |