Lewitt LCT 940
TUBE // WARM // RICH // NUANCED // CLEAR // FET
… an infinite number of microphones in a single housing
The LCT 940 combines a premium large-diaphragm FET condenser microphone and a top-notch tube microphone in a single housing. Choose between the two main settings of “TUBE” and “FET”, or find your sweet spot in between – they are mixable at any possible ratio.
Specifications
Type
Condenser, externally polarized
Acoustical operating principle
Pressure gradient transducer
Transducer Ø
25.4 mm, 1 in
Polar pattern
Omni, wide cardioid, cardioid, supercardioid, figure-8, four intermediate patterns
Frequency range
20 … 20,000 Hz
Sensitivity
23 mV/Pa, -33 dBV/Pa (cardioid)
20 mV/Pa, -34 dBV/Pa (omni)
23 mV/Pa, -33 dBV/Pa (figure-8)
Equivalent noise level (FET)
8 dB (A), cardioid
9 dB (A), omni
8 dB (A), figure-8
Equivalent noise level (Tube)
12 dB (A), cardioid
13 dB (A), omni
12 dB (A), figure-8
Max. SPL for 0.5 % THD (FET)
143 dBSPL, 0 dB pre-attenuation
Max. SPL for 0.5% THD (Tube)
140 dBSPL, 0 dB pre-attenuation
Signal / noise ratio (FET)
86 dB (A)
Signal / noise ratio (Tube)
82 dB (A)
Dynamic range of FET mic. Amp.
135 dB
Dynamic range of Tube mic. Amp.
128 dB
Pre-attenuation pad
0 dB
-6 dB
-12 dB
-18 dB
Low-cut filter
linear
40 Hz (12 dB/oct)
150 Hz (6 dB/oct)
300 Hz (6 dB/oct)
Internal impedance
200 Ω
Rated load impedance
1,000 Ω
PSU – supply voltage
230 V, 50 Hz
110 V, 60 Hz
Current consumption
170 mA
Connector
Gold plated 11-pin XLR
Microphone dimensions
192 x 60 x 46 mm, 7.5 x 2.4 x 1.8 in
PSU dimensions
250 x 150 x 70 mm, 9.8 x 5.9 x 2.8 in
Microphone net weight
662 g, 23.3 oz
PSU net weight
1930 g, 68.1 oz